Filter
Top Products
Chapter 7 System Screens
NWA-3500/NWA-3550 User’s Guide
114
Note: Regardless of how you configure this screen, you still use the local system
password to log in via the console port (for internal use only).
Figure 74 System > Password.
The following table describes the labels in this screen.
Table 24 System > Password
LABEL DESCRIPTIONS
Enable Admin at
Local
Select this check box to have the device authenticate management
logins to the device.
Use old setting Select this to have the NWA use the local management password
already configured on the device (“1234” is the default).
Use new setting Select this if you want to change the local management password.
Old Password Type in your existing system password (“1234” is the default
password).
New Password Type your new system password (up to 31 characters). Note that as
you type a password, the screen displays an asterisk (*) for each
character you type.
Retype to
Confirm
Retype your new system password for confirmation.
Enable Admin on
RADIUS
Select this (and configure the other fields in this section) to have a
RADIUS server authenticate management logins to the NWA.
Use old setting Select this to have a RADIUS server authenticate management
logins to the NWA using the RADIUS username and password
already configured on the device.
Use new setting Select this if you want to change the RADIUS username and
password the NWA uses to authenticate management logon.
User Name Enter the username for this user account. This name can be up to
31 ASCII characters long, including spaces.