Filter
Top Products
Chapter 19 Log Screens
NWA-3500/NWA-3550 User’s Guide
229
Click Logs > View Log. The following screen displays.
Figure 140 Logs > View Log
The following table describes the labels in this screen.
19.5 The Log Settings Screen
Use this screen to configure where and when the NWA will send the logs, and
which logs and/or immediate alerts to send.
Table 73 Logs > View Log
LABEL DESCRIPTION
Display Select a log category from the drop down list box to display logs
within the selected category. To view all logs, select All Logs.
The number of categories shown in the drop down list box depends
on the selection in the Log Settings page.
Time This field displays the time the log was recorded.
Message This field states the reason for the log.
Source This field lists the source IP address and the port number of the
incoming packet.
Destination This field lists the destination IP address and the port number of the
incoming packet.
Notes This field displays additional information about the log entry.
Email Log Now Click Email Log Now to send the log screen to the e-mail address
specified in the Log Settings page.
Refresh Click Refresh to renew the log screen.
Clear Log Click Clear Log to clear all the logs.