Filter
Top Products
Chapter 3 Status Screens
NWA-3500/NWA-3550 User’s Guide
42
Registration Type This field is available only when the NWA is in AP controller
management mode.
This displays Manual when an access point in managed AP mode
needs to register to the NWA manually or Always Accept when
the NWA automatically adds any detected access point in
managed AP mode to the managed AP list.
Management Mode This field is available only when the NWA is in AP controller
management mode.
This displays Controller when the NWA is in AP controller
management mode.
System Resources
Flash This field displays the amount of the NWA’s flash memory
currently in use. The flash memory is used to store firmware and
SSID profiles.
Memory This field displays what percentage of the NWA’s volatile memory
is currently in use. The higher the memory usage, the more likely
the NWA is to slow down. Some memory is required just to start
the NWA and to run the web configurator.
CPU This field displays what percentage of the NWA’s processing ability
is currently being used. The higher the CPU usage, the more likely
the NWA is to slow down.
WLAN1
Associations
This field is not available when the NWA is in AP controller
management mode.
This field displays the number of wireless clients currently
associated with the first wireless module. Each wireless module
supports up to 128 concurrent associations.
WLAN2
Associations
This field is not available when the NWA is in AP controller
management mode.
This field displays the number of wireless clients currently
associated with the second wireless module. Each wireless module
supports up to 128 concurrent associations.
Interface Status This section is not available when the NWA is in AP controller
management mode.
Interface This column displays each interface of the NWA.
Status This field indicates whether or not the NWA is using the interface.
For each interface, this field displays Up when the NWA is using
the interface and Down when the NWA is not using the interface.
Rate For the LAN port this displays the port speed and duplex setting.
For the WLAN1 and WLAN2 interfaces, it displays the downstream
and upstream transmission rate or N/A if the interface is not in
use.
SSID Status This section is not available when the NWA is in AP controller
management mode.
Interface This column displays each of the NWA’s wireless interfaces,
WLAN1 and WLAN2.
Table 4 The Status Screen
LABEL DESCRIPTION