ZyXEL Communications NWA-3500 Marine Radio User Manual


 
Chapter 6 Tutorial
NWA-3500/NWA-3550 User’s Guide
104
6.5.6 Configuring the Managed Access Points List
At this point, you have 3 NWA managed APs (B, C and D) that can now be
managed by the primary controller AP.
First in the Web Configurator of your primary controller AP (A), go to Controller
> Configuration.
Figure 67 Tutorial: Registration Type
If the Registration Type is set to Manual, the controller AP add managed APs to
a queue in the Un-Managed Access Points List in the Controller > AP Lists
screen.
If the Registration Type is set to Always Accept, the controller AP immediately
adds the AP to the Managed Access Points List in the Controller > AP Lists
screen.
For this example, we set the Registration Type to Manual.
1 To add a managed AP to the controller AP’s coverage, go to Controller > AP
Lists.
Figure 68 Tutorial: AP List (Un-Managed)