5
Getting Started
Lorex EDGE
+
: Front Panel
All Models
1. IR Receiver: Internal IR receiver for the remote control.
2. USB port: Connect a USB flash drive for data backup and firmware updates (download from
website).
3. Power Indicator: LED indicator for system power. When system is powered on, LED is lit red.
4. HDD Indicator: LED indicator for internal hard drive. When in continuous recording mode,
LED pulses red.
5. LIST: Opens the Event List menu.
6. OSD: Show/hide the on-screen display.
7. Primary Controls:
• MENU: Opens the system main menu.
• : Press to open the Split-Screen Selection menu (
8 / 16-channel only
).
From full-screen single channel view, changes display view to Quad split-screen (
4-channel model only
)
• S/CH+: Move cursor in menus up; Channel Up.
• X/FWD: Move cursor in menus right; during playback, increase forward playback speed (5X, 15X, 60X).
• W/REW: Move cursor in menus left; during playback, increase reverse playback speed (5X, 15X, 60X)
• /: Start/pause forward playback.
• T/CH-: Move cursor in menus down; Channel down.
• ESC: Go back / exit menus.
• : Confirm menu selections. Press twice in live viewing to access system information.
8. : While in Event List menu, press to delete a selected event (no confirm or undo).
• : During Live Mode and Playback; Press to take a screenshot of the main display—USB
flash drive must be connected
(8/16-channel only).
• Increase/Decrease buttons:
• : Increase the value of selected menu option.
• : Decrease the value of selected menu option.
5
8
3
1 2
4
6
7