Filter
Top Products
19
PLAYBACK
View recorded video on the system through playback mode.
To begin playback:
1. From the main screen, click . Playback mode opens.
NOTE: If toolbar is not visible, first click .
2. Select and change the date, month, year, time, and/or frame for playback and click .
3. During playback, you have access to the following:
• : Click to pause playback; press again to resume playback.
• : Click to increase reverse playback speed (5X, 15X, 60X).
• : Click to increase forward playback speed (5X, 15X, 60X).
• : Click to open the Split-Screen Selector (8/16-channel
only
); Click to view playback in
Quad mode (4-channel
only
)
•
: Click to open the Event List menu. See “Playback Mode” on page 24.
4. Click any channel to view the selected channel in full-screen; or click , , , .
5. Click anywhere in the playback bar to set a playback marker. Playback Markers can be used
for faster searching in the Event List.
See “Playback Markers” on page 20.
6. Right-click anywhere on the screen to exit.
Figure 6.0 Playback display view
The playback time appears in the bottom-right
corner of the screen.