Filter
Top Products
10
Getting Started
Remote Control
The remote control is the secondary input device
for navigating the system’s graphical user
interface.
To use the remote control:
1. LIST: Open the Event List menu.
2. OSD: Show/hide the on-screen display.
3. Primary controls:
• MENU: Opens the system main menu.
• : Press to open the Split-Screen Selection
menu (
8 / 16-channel only
).
From full-screen single channel view, changes
display view to Quad split-screen (
4-channel
model only
)
• S/CH+: Move cursor in menus up; Channel Up.
• X/FWD: Move cursor in menus right; during
playback, increase forward playback speed (5X,
15X, 60X).
• W/REW: Move cursor in menus left; during
playback, increase reverse playback speed (5X,
15X, 60X)
• /: Start/pause forward playback.
• T/CH-: Move cursor in menus down; Channel
down.
• ESC: Go back / exit menus.
• : Confirm menu selections.
4. : While in Event List menu, press to delete a selected event (no confirm or undo).
5. : During Live Mode and Playback, Press to take a screenshot of the main display—USB
flash drive must be connected
(8/16-channel only).
6. Increase/Decrease buttons:
• : Increase the value of selected menu option.
• : Decrease the value of selected menu option.
Figure 3.0 Remote Control