Filter
Top Products
59
Selecting Any Plotter Item With the Cursor
1. Use the zoom keys and the arrow keys to move around the plotter
and find the item you wish to select.
2. Use the arrow keys and center the cursor cross-hair on the desired ob-
ject. On most items, a pop-up box will give the name of the selected item.
Navigate to Cursor Position on Plotter
The GO TO CURSOR command navigates to the current cursor position on
the plotter. It's a quick and handy way to navigate to anything you can
see on the plotter display.
1. Use the cursor (controlled by the arrow keys) with the zoom in and
zoom out keys to maneuver around the plotter until you find a location
you want to go to.
2. Center the cursor over the location to select it. See the example in
the following figure.
3. Press
MENU|ENT and the M52 Pro will begin navigating to the cursor
location.
The Plotter Page will display a dotted line from your current position to
the cursor position. The Navigation Page displays a compass rose showing
navigation information to your destination. See the following examples.
The Plotter Page at left clearly shows the course line connecting your
current position to your destination. The Navigation Page, right, will also
show navigation information.