Filter
Top Products
74
3. The Delete All Icons command will ask if you are sure. Press ← to
YES|ENT. All icons will be deleted from the plotter.
To Delete By Symbol:
1. Press MENU|↓ to DELETE MY ICONS|ENT.
2. Press ↓ to
DELETE BY SYMBOL and press ENT.
3. The Delete by Symbol command will launch the Select Symbol menu.
Select the icon symbol to delete and press
ENT. A message appears say-
ing all icons with the selected symbol have been deleted.
To Delete from Plotter:
1. Press MENU|↓ to DELETE MY ICONS|ENT.
2. Press ↓ to
DELETE ALL ICONS, DELETE BY SYMBOL, or DELETE FROM PLOTTER
and press ENT.
3. The Delete From Plotter command will prompt you to move the cur-
sor over an icon to select it. After selecting the icon, press
ENT and it
will be removed from the plotter.
Navigate to an Icon
1. Use arrow keys to center cursor cross-hairs over the icon.
2. To navigate to the selected icon location: press
MENU|ENT|EXIT. Fol-
low course line on the Plotter Page or the compass bearing arrow on the
Navigation Page.
Routes
A route is a series of waypoints, linked together in an ordered sequence
used to mark a course of travel. The course from one waypoint to the
next is a leg; routes are composed of one or more legs.
Create and Save a Route
You can create a route by selecting existing waypoints from the way-
point list or you can set a series of route waypoints on the plotter with
cursor arrows and the Enter key.