Filter
Top Products
76
Route creation sequence: At left, the Plotter Page shows the waypoints
we want to visit in our route. Set the first route point at waypoint
(001). Center, move cursor to the next waypoint in the route and press
Enter. Waypoint added message appears. Right, continue adding way-
points until you reach the end of the route.
5. Move the cursor to the next point in the route and press ENT to set
the next waypoint.
6. Repeat step five until the route reaches your destination.
7. To save your route, press
EXIT. The M52 Pro reverts to the Edit
Route screen, with the route automatically named "Route 1" and stored
in the M52's internal memory. To return to the main display press
EXIT
repeatedly.
Delete a Route
1. From the
NAVIGATION PAGE, press MENU|ENT or from the PLOTTER PAGE
press
MENU|MENU|↓ to ROUTE PLANNING|ENT.
2. Press ↓ to route name|
ENT.
3. Press ↓ to
NAVIGATE|ENT|→ to DELETE|ENT|← to YES|ENT.
Tip:
You can also delete all routes at once.
1. From the
NAVIGATION PAGE, press MENU|ENT or from the PLOTTER
P
AGE press MENU|MENU|↓ to ROUTE PLANNING|ENT.
2. Press → to DELETE ALL|ENT|← to YES|ENT.
Edit a Route Name
1. From the
NAVIGATION PAGE, press MENU|ENT or from the PLOTTER PAGE
press
MENU|MENU|↓ to ROUTE PLANNING|ENT.
2. Press ↓ to route name|
ENT|ENT.