Filter
Top Products
93
To set Alarm Volume: Press ↓ to VOLUME. Press → or ← to move the bar.
The left end of the scale is low volume; the right end is high volume. Af-
ter the option is set, press
EXIT|EXIT to return to the page display.
To set Alarm Style: Press ↓ to ALARM STYLE|ENT. Press ↑ or ↓ to change the
style, then press ENT. After the option is set, press EXIT|EXIT to return
to the page display.
Track Smoothing
Track Smoothing prevents wandering of trails, the
steering arrow, compass rose and plotter display in
track-up mode.
To turn on/off track smoothing:
1. Press MENU|MENU, highlight GPS SETUP and press
ENTER.
2. Select
TRACK SMOOTHING and press ENTER.
Trail Options
There are several options you can use with trails. Some affect all trails,
other options can be applied to a particular trail. You can change the
way trails are updated, you can display or hide trails, create a new
trail, delete a trail, etc.
To access the Trails Menu:
1. Press MENU|MENU|↓ to MY TRAILS|ENT.
Delete All Trails
To remove all of the trails from memory: from the Trails Menu, press →
to
DELETE ALL|ENT|← to YES|ENT.
WARNING:
If you uncheck the Update Trail option, automatic trail
creation and recording will be turned off. You must turn
it back on to record trails. The default setting is on.
Update Trail Option
This menu lets you change the way the trail updates occur.
To turn on/off active trail:
1. From the Trails Menu, press → to OPTIONS|ENT. With UPDATE ACTIVE
TRAIL highlighted, press ENT to check it (turn on) and uncheck it (turn
off).
Update Trail Criteria (Auto, Time, Distance)
The options are automatic, time, or distance. When it's in the default
automatic mode, the unit doesn't update the plot trail while you're