63
Create Waypoint by Average Position
This feature sets a waypoint at the current position after averaging
several position readings.
1. Press
WPT|↓ to CREATE NEW|ENT.
2. Press ↓ or ↑ to
AVERAGE POSITION|ENT|ENT.
3. Wait while the unit takes points to average for the position. (The
greater the number of points, the greater the accuracy.) When the desired
number of points accumulates, press
ENT to create and save the waypoint.
4. The Edit Waypoint menu appears. You can simply save the waypoint
by pressing
EXIT|EXIT or you can edit the waypoint.
Create Waypoint by by Projecting a Position
This feature sets a waypoint at a point located a specific distance and
bearing from a reference position. The reference position must be se-
lected from your waypoint list.
1. Press
WPT|↓ to CREATE NEW|ENT.
2. Press ↓ to
PROJECTED POSITION|ENT|ENT.
3. Press ↓ to
SET REFERENCE|ENT. Use ↑ and ↓ to select a waypoint.
When the point has been selected, press
ENT and the point's position
appears as the reference position.
4. Press ↑ to
DISTANCE|ENT. Press ↑ or ↓ to change the first character,
then press → to the next character and repeat until the distance is cor-
rect. Press
ENT.
5. Press ↓ to
BEARING|ENT. Press ↑ or ↓ to change the first character,
then press → to the next character and repeat until the bearing is cor-
rect. Press
ENT.
6. Press ↓ to
PROJECT|ENT. The Edit Waypoint menu appears. You can
simply save the new projected waypoint by pressing
EXIT|EXIT or you
can edit the waypoint. (Press
EXIT|ENT if you want to immediately be-
gin navigating to the new waypoint.)
Delete a Waypoint
To delete a waypoint from the waypoint list: press
WPT|ENT|↓ to way-
point name|
ENT|→ to DELETE|ENT|← to YES|ENT. To return to the pre-
vious page, press
EXIT|EXIT.
To delete a waypoint from the plotter:
1. Use the arrow keys to select the waypoint with the cursor.
2. Press
WPT|→ to DELETE|ENT|← to YES|ENT. To return to the previ-
ous page and clear the cursor, press
EXIT.