Filter
Top Products
78
Navigate a Route backward
Here's how you run a route backward, from the end waypoint to the
beginning waypoint:
1. From the
NAVIGATION PAGE, press MENU|ENT or from the PLOTTER PAGE,
press
MENU|MENU|↓ to ROUTE PLANNING|ENT.
2. Press ↓ to select route name|
ENT|↓ to NAVIGATE|→ to RE-
VERSE
|ENT|← to NAVIGATE|ENT.
3. Upon arrival at your destination, cancel navigation:
press
MENU|MENU|↓ to CANCEL NAVIGATION|ENT|← to YES|ENT.
Navigating along a route: Figs. 1 & 4 show the Plotter Page (top) and
Navigation Page (bottom) while running a route. Boater is heading
straight for waypoint 3. In Figs. 2 & 5, the traveler has arrived at Wpt
3; the arrival alarm has been triggered and the bearing arrow on the
compass rose has turned to point toward Wpt 4, off to the northeast. In
Figs. 3 & 6 the traveler has turned northeast on his new course and is
heading straight for Wpt 4, which is 0.43 miles away.
Figure 1.
Figure 2.
Figure 3.
Figure 4.
Figure 5.
Figure 6.