Filter
Top Products
88
Overlay Data command on the Sonar Menu, at left. Overlay Data
Shown selection menu, right. In this example, we scrolled down the
data list to highlight "Ground Speed."
When selected, the data type shifts to the top of the data list and a
check mark appears beside the data type. (If you wish, you may now
use ↓ or ↑ to select other Data Types for display.)
3. To return to the previous page, press
EXIT|EXIT.
To turn off displayed data:
1. From the Plotter or Sonar page, press MENU|↓ to OVERLAY DATA|ENT.
2. Press ↓ or ↑ to select Data Type|
ENT. The selected data type disap-
pears from the top of the list and reverts to its
previous, unchecked position. (If you wish, you
may now use ↓ or ↑ to select other Data Types to
turn off.)
3. To return to the previous page, press
EXIT|EXIT.
To change displayed data font size:
1. From the Plotter or Sonar page, press MENU|↓
to
OVERLAY DATA|ENT.
2. Press ↓ or ↑ to select Data Type|press → or ← to Data Size|
EXIT.
The selected data type will be displayed in the new size. (To change the
font size for another Data Type, press
ENT and repeat these steps, be-
ginning with step two above.)
3. To return to the previous page, press
EXIT.