A SERVICE OF

logo

120 GL-1010 Administrator’s Guide
Do not log out of TopAccess. Proceed to the next section, Set Print
Services
on page 120.
Set Print Services
1 Login as the system administrator.
2 Click the Administration tab.
3 Click the Setup submenu.
4 Click the Print Services link.
5 From the Service drop-down list, select Enable.
6 From the Operating Mode drop-down list, select Print Server.
7 From the NetWare Environment drop-down list, select the
applicable option:
M 3.x Bindery (or 4.x Bindery Emulation) Mode
M 4.x/5.x NDS Mode
M 3.x and 4.x/5.x Mixed Mode.
8 Depending on the option you selected, perform the applicable
step: