GL-1010 Administrator’s Guide 235
UNKNOWN GL-1010 NETWORK SETTINGS
Problem Description
There are several ways you can check or change the current
network settings configured for the GL-1010:
n Print out a configuration page from the copier’s control
panel. Refer to
Print Test Pages on page 45 for instructions.
n Access the protocol and device settings from the copier’s
control panel. Refer to
Modifying Device Settings on page 27.
n Use the embedded web administration utility, TopAccess, to
view current network settings. Refer to the TopAccess
HTML Help for instructions.
Jobs trapped in
Novell print queue.
5 If you set up Novell print services,
can you see the print job using
PCONSOLE or NWAdmin?
Next
Step
↓
→ Refer to your
Novell
PCONSOLE or
NWAdmin user
documentation
for help using
these utilities.
Different or
unreachable
network segment.
6 Have you checked the GL-1010’s
gateway and subnet settings to
make sure the GL-1010 is part of
the same network Gateway as
the client from which you are
trying to print?
Next
Step
↓
→ Configuring TCP/
IP Protocol
Settings on page
19.
Network Problems.
7 Are other services and
communications performed over
the network behaving in the
normal and expected manner?
Next
Step
↓
→ Refer to your
network
documentation
or use a network
diagnostic utility
to research a
network problem.
Cannot Print to GL-1010
Possible Cause Check Yes No
For
Instructions,
Go To...
