156 GL-1010 Administrator’s Guide
Enabling LPR/LPD Printing
Supporting LPR printing from a client workstation requires
performing the following steps:
1 Install Microsoft TCP/IP Printing Services software.
2 Add a LPR Port and map it to the GL-1010 using the
Microsoft Add Printer wizard.
All of these procedures are described in detail in the GL-1010
Operator’s Guide (Basic).
Enabling IPP Printing
IPP printing allows users to print to the device over the Internet.
To establish IPP printing services, you must complete these steps:
n Install the IPP client port software.
n Install the printer and assign it to an IPP port.
n Configure the IPP port properties. Open the Printers Folder
and right-click on the IPP printer icon. Choose
Properties.
All of these procedures are described in detail in the GL-1010
Operator’s Guide (Basic).
INSTALLING MACINTOSH PPD FILES
Considerations and Limitations
n The Toshiba Macintosh PPD (PostScript Printer Description)
file contains information about GL-1010-specific features
which is used to extend the LaserWriter 8 (version 8.6.5 or
higher) standard functionality.
n The Macintosh PPD file is compressed in the StuffIt format.
It should be copied to the
System Folder: Extensions: Printer
Descriptions
folder. The StuffIt program must be installed to
decompress the PPD file.
n The PPD file works in conjunction with the standard
Macintosh LaserWriter 8 printer driver version 8.6.5 (or
higher).
n The GL-1010 supports both LPR and AppleTalk printing
from Macintosh systems.
