136 GL-1010 Administrator’s Guide
LPR/LPD PRINTING
Considerations and Limitations
n Microsoft TCP/IP Printing Services must be added and
configured from the Network folder in the Windows Control
Panel before you can add an LPR printer port. (Windows NT
and 2000 only.)
n To print a file using the LPR command line, the file must be
in an encapsulated print format or standard text file.
Prerequisites
n Install Microsoft TCP/IP Printing Services.
n Add an LPR port. Refer to Add a LPR Port and map it to the GL-
1010 using the Microsoft Add Printer wizard.
on page 156
Microsoft LPD Setup
1 Launch your Web browser and enter the IP address of the
GL-1010 you want to configure to access the embedded Web
site, TopAccess. (Refer to
Opening TopAccess on page 64.)
If you do not know the IP address, you can find it by using
GL DocMon (see the GL-1010 Operator’s Guide (Basic) for
details).
2 Click the Login link and enter the administrative username
and password.
3 Click the Administration tab.
4 Click the Setup submenu.
