200 GL-1010 Administrator’s Guide
NETWORK CONNECTIVITY PROBLEMS
Problem Description
There are many variables within a network environment that
make installing an integrated device challenging. The easiest
environment in which to install the GL-1010 controller is over
TCP/IP using a DHCP server to dynamically assign and resolve
IP addresses between devices.
Using the default configuration settings also assures an easier
implementation. However, you may be required to customize the
settings to accommodate your particular network environment.
Some common network configuration options are shown below,
with the steps required to configure an GL-1010 in each. If you
perform all the steps in the applicable checklist and still cannot
properly print to the GL-1010, contact your Toshiba authorized
dealer for further assistance.
