A SERVICE OF

logo

212 GL-1010 Administrator’s Guide
Network print settings
are not properly
configured.
6 Use the LCD Touch Screen to
check that printing is turned
Online and that the Protocol and
Services settings are set
properly. Are the settings
correct?
Next
Step
Refer to PART 2,
Establishing
Network Print
Services, which
starts on
page 113.
7 Reboot the controller and restart
the copier for any changes to
take effect. Re-submit the job and
check the Current Jobs queue.
Does the job appear in the list?
End
Next
Step
Reboot the GL-
1010 on page
47.
Submitted Job Not in Current Jobs Queue (Continued)
Possible Cause Check Yes No
For
Instructions,
Go To...