48 GL-1010 Administrator’s Guide
3 Press REBOOT. You will be asked to confirm that you want to
reboot the controller:
4 Press YES to proceed. The controller goes offline while
rebooting and the LCD Touch Screen displays at first
Shut-
down in progress
and then Starting Controller.
Please wait.
When the controller comes back online, you
can resume network and printing functions.
Shutdown the GL-1010
Gracefully powering down the Toshiba Network Document
Processing System begins with shutting down the GL-1010
controller from the copier control panel. After you have shut
down the controller, you can safely power off the copier.
Shutting Down the Controller
Important: Do NOT power off the controller by pressing the
controller’s power switch for three seconds or more since it may
happen to a Lock, and in worst case, this may damage the
controller HDD or corrupt the GL-1010 software.
Instead, power down the controller from the copier LCD Touch
Screen, using the Shut Down function.
