GL-1010 Administrator’s Guide 11
NetWare Printing Disabled For NDPS support, you will need to
configure the GL-1010 as an NDS
PSERVER or NPRINTER. NDPS is a
separate software component NLM,
which you must install on the NetWare
file server.
Microsoft Printing Enabled Peer to Peer SMB/NETBIOS printing
on TCP/IP, IPX/SPX, or NetBEUI. The
printer name portion of the port name is
DSSC, which cannot be modified.
LPD Printing Enabled The queue name is DSSC, which
cannot be modified.
EtherTalk Phase II Currently, Macintosh printing is
supported only over EtherTalk;
TokenTalk is not supported.
AppleTalk Name GL<MAC Address>
<MAC Address> is the unique machine
address of the NIC installed on the
GL-1010.
AppleTalk Type LaserWriter This setting cannot be modified.
AppleTalk Zone * Default (local) zone. If there are more
than one AppleTalk zones defined, the
GL-1010 appears in the default zone
unless another zone is manually
specified.
Macintosh Printing Enabled To enable Macintosh printing, you must
have an Ethernet NIC installed in the
GL-1010.
HTTP Server Enabled The HTTP server is integral for device
management and job monitoring.
Therefore, it is not possible to disable it.
IPP Enabled IPP works only over TCP/IP. Cannot be
disabled.
Default Controller Settings
Property Default Setting Comments
