154 GL-1010 Administrator’s Guide
3 When the setup program finishes copying the necessary files
to your computer, you are prompted to view the Read Me file
and launch GL DocMon. Deselect either or both options, if
desired, and then click
Finish to exit the Setup Wizard.
Uninstalling Client Software
1 If open, close the GL DocMon application.
2 Insert the Toshiba e-STUDIO GL-1010 Client CD-ROM into
the CD-ROM drive. If Auto-Run is enabled, the InstallShield
Setup Wizard starts automatically.
Otherwise, choose
Run from the Start Menu and then locate
the Setup.exe file on the CD. Click
OK to launch the setup
program.
3 The setup program automatically detects previously installed
versions and opens the Client Setup Maintenance Program.
4 Select Remove to uninstall all previously installed GL-1010
components from the client workstation
5 Follow the setup wizard as files are removed from your
system. Click
Finish to exit the setup program.
6 You may have to reboot your system before all components,
such as the program items from the Windows
Start menu, can
be completely removed.
NOTE:
Only Windows 9x/Me
automatically creates the
printer port. If you are using
Windows NT or Windows
2000, you must manually
create the printer port after
installing the printer
drivers.
