A SERVICE OF

logo

Open as PDF
next previous
GL-1010 Administrator’s Guide 41
After the network settings are configured the Wireless
information is shown.
In the status area on the top of the copier display, the Data Rate
will be shown on the third line. The panel will indicate either Not
Connected or display the current transfer rate.
The two Network Types are Infrastructure and Ad Hoc.
The screens are slightly different between Infrastructure Mode
and Ad Hoc Mode.
Press the down arrow to navigate through the wireless options.
By default, WEP security is set to “Disabled.”
When you enable WEP security, the Encryption and Key buttons
appear.