A SERVICE OF

logo

202 GL-1010 Administrator’s Guide
Novell Environment:
M IPX/SPX Protocol
M Novell NetWare vr. 3.x,
4.x, or 5.x networking
services
M Clients running on
Windows 95/98/2000/
Me or NT platform
1 Is the IPX/SPX protocol
enabled? Is the correct Frame
Type selected? If you do not
know the Frame Type or
support multiple Frame Types,
select Auto.
Next
Step
Configuring IPX/
SPX Protocol
Settings on page
22.
2 If applicable, did you
successfully set up queue-
based printing?
Next
Step
Network Printer
Mode on page 116
or Print Server
Mode on page
118.
3 If applicable, did you
successfully set up NDPS
printing?
Next
Step
NDPS Mode on
page 121.
4 Did you configure the
controller for Novell print
services using the copier front
panel or TopAccess?
Next
Step
Network Printer
Setup on page
117, Print Server
Setup on page
119, or Setting up
the GL-1010 as an
NDPS Object on
page 124.
5 Was the GL-1010 printer
driver correctly installed?
Next
Step
Installing GL-1010
Windows Printer
Drivers on page
155.
6 Is the driver’s port name
correct?
Next
Step
Driver Mapped to
Wrong Port on
page 243.
7 Can you see the device in
Windows Network
Neighborhood?
End Check that the
NetBEUI protocol
is enabled. If it is,
go to Cannot Print
To GL-1010 Device
on page 234.
Resolving Network Connectivity and Printing Issues (Continued)
Network
Configuration Check... Yes No
For
Instructions,
Go To...