A SERVICE OF

logo

Open as PDF
next previous
GL-1010 Administrator’s Guide 21
3 Enter the IP Address of the Primary or Secondary WINS and/
or DNS server using the copier’s numeric keypad.
4 Press OK to save the changes for the duration of the session.
The
Apply Changes Check screen is displayed any time
controller settings change:
5 If you are finished changing controller settings, press YES.
Otherwise, press
NO to continue your session. Once the
controller reboots, a configuration page prints out. Verify that
the settings were changed successfully.
NOTE:
Check the configuration
page that automatically
prints upon startup to
confirm that the changes
were applied.