Filter
Top Products
Protect PV.630 Maintenance and Servicing
6 of 14 80000047962 BAL
4.3 Inspection
The system is inspected to establish its current condition; the ac-
tual content of the inspection and the intervals at which it is to be
performed must be defined on the basis of the relevant installation
site and operating conditions.
Contact with voltage.
Inspection work must sometimes be performed when the
system is connected to the power supply.
Risk to life due to electric shock.
Only trained skilled personnel may carry out work on
the system.
Do not touch any live parts.
Secure the work area.
Observe the safety regulations.
Observe the Technical Rules for Plant Safety (TRBS =
Technische Regeln für Betriebssicherheit).
Wear personal protective equipment.
i
With all relevant precautionary measures in place, the
measuring lines must be routed to the live measuring
points in order to record measured data.
DANGER