Filter
Top Products
Protect PV.630 Operating Instructions
22 of 72 8000047961 BAL
3.4 Inappropriate Use
No liability is accepted if the equipment is used for applications not
intended by the manufacturer (= inappropriate use). Inappropriate
use can cause serious or fatal personal injury. The responsibility
for any measures necessary for the prevention of personal injury
or damage to property is borne by the equipment operator or user.
3.5 Standards, Directives and CE Mark
The equipment complies with currently applicable DIN and VDE
regulations. The requirements of BGVA3 are met on the basis of
compliance with EN 50274/VDE 0660-51.
The requirements of VDE 0100, Part 410, IEC 60364-4-41, “Func-
tional extra-low voltage with safe isolation” and IEC 62109, “Safety
of power converters for use in photovoltaic power systems” have
been complied with where applicable.
The CE mark on the unit confirms compliance with the EC frame-
work directives for 2006/95/EC (Low Voltage) and for 2004/108/EC
(Electromagnetic Compatibility), provided that the actions outlined
in the instructions are observed.
3.6 Nameplate
The following information appears on the nameplate:
Figure 4 Rating plate (example)