Filter
Top Products
Protect PV.630 Maintenance and Servicing
80000047962 BAL 7 of 14
4.3.1 Visual Inspection
When visually inspecting the system, check:
There is any mechanical damage or if foreign bodies can be
found in the system
Whether any corrosion is present
Whether any moisture is present in the system
Whether excessive thermal stress can be detected at cables or
components
Whether any conductive dirt or dust has accumulated in the
system
Whether any accumulation of dust affects heat dissipation
Whether the fans are dirty or damaged
Whether the air filters are dirty or damaged
Whether the supply and exhaust air system (in the case of a
station installation) is dirty or damaged
The intervals at which visual inspections should be performed are
largely determined by the site conditions.
R17.4
F86
A
38.1
A
38.2
A
51
K62
F101
F84
F61
F60
F22
F13
S100
M2
X3.U
X3.V
X3.W
F86.1
2700
2
0
2
8
1800 228
1500 1200
L5.1-L5.3A86.3L4.1-L4.3 A86.2
A17
A91.1
K91
A
29.1 A27
A
115.1
A
115.2
A12 A13
A20
R17.3
C12
C13
A1
F93 F94 A31 F91 X11-X33 F83
F17 F31
F38 F51
F81
F41.1 - F41.8
X100-X500
X101,X103
X121,X201
X202,X286
X300,X500
S200
M
3
M1
Figure 1 View of cabinet without doors