Filter
Top Products
Protect PV.630 Operating Instructions
8000047961 BAL 7 of 72
Handling
These instructions are structured so that all work necessary for
operation can be performed by appropriately qualified skilled per-
sonnel.
Illustrations are provided to clarify and facilitate certain steps.
If danger to personnel and equipment cannot be ruled out in the
case of certain work, it is highlighted accordingly by pictograms
explained in Chapter 2, Safety Regulations.
1.2 Target Groups
This document explains which groups these instructions are in-
tended for and the obligations of these groups. Definitions of staff
requirements are also provided.
Every care has been taken in drafting these instructions. Should
you notice any errors, please contact the manufacturer immediate-
ly.
So that the instructions remain up to date, please remember to in-
sert any supplements received from AEG Power Solutions GmbH.
1.3 Explanations of Target Groups
These instructions are intended for various target groups:
The equipment operator or the person appointed by him (the
party responsible for the equipment)
The skilled personnel responsible for using the equipment
1.3.1 Obligations of the Equipment Operator
The equipment operator or the person appointed by him/her (the
party responsible for the equipment) is responsible for the safety of
personnel and for the safety, function and availability of the equip-
ment. These factors depend on compliance with the safety instruc-
tions. Compliance with the safety instructions is required at all
times.
To ensure the safety of personnel, the equipment operator
must:
Select skilled personnel on the basis of skills and training (
Chapter 1.3.2)
Make skilled personnel aware of the need for compliance with
regulations ( Chapter 1.3.2)
Provide skilled personnel with personal protective equipment,
user information and instructions
Provide skilled personnel with regular briefings about all safety
measures and keep a record of such briefings
Inform skilled personnel of where fire extinguishers are located
and how to use them
To ensure the safety of the equipment, the equipment opera-
tor must: