Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Installation and Test for Compact Modular Cabinets
555-230-128
Issue 3
May 1998
Install and Cable the Cabinets
Page 1-9Install the System Cabinets
1
Install Cabinet A — Wall-Mount
Figure 1-4. Left Panel Used as Mounting Template
1. Place the template on the wall ensuring that the top surface is level.
2. Mark two 1/8-inch (0.3 cm) pilot holes in the mounting hole locations.
3. Remove the template from the wall.
4. Drill the two pilot holes.
5. Thread two #12 x 1-inch shoulder screws partially into the holes.
6. Set the cabinet onto the wall and align the slots with the shoulder screws.
See Figure 1-5
. Slide the cabinet to the left to hold it in place. Tighten the
screws securely.