Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Installation and Test for Compact Modular Cabinets
555-230-128
Issue 3
May 1998
Install and Cable the Cabinets
Page 1-41Install Equipment Room Hardware
1
Label the Main Distribution Frame
Figure 1-21 shows the graphic symbols used on the supplied labels for the
system, cross-connections, information outlets, and cables.
1. Write the floor and building identification on each label as required.
2. Insert the labels into the plastic holders.
3. Snap the holders into the appropriate locations on the MDF.
Figure 1-21. Label Graphic Symbols and Nomenclature
1. Label the cables as required using the supplied labels. Label code
number 220A (comcode 103970000) contains all required labels.
Figure Notes
1. Floor and building identification
2. Cabinet
3. Carrier
4. Slot
5. Information outlet
6. Site/satellite closet
7. Tie circuit
8. Floor
9. Building
r758422i LJK 050996