Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Installation and Test for Compact Modular Cabinets
555-230-128
Issue 3
May 1998
Install and Cable the Cabinets
Page 1-54Activate and Administer the System
1
Administer the Attendant Console
If no attendant console is installed, proceed to ‘‘Save Translations’’.
1. Enter display system-parameters country-options and press
Enter.
Verify the system’s companding mode for its local stations (usually, A-Law
for Europe and mu-Law for North America and Japan).
2. If necessary, enter change terminal-parameters 603/302B1 to change
the default system-level parameters and audio levels for these terminals.
NOTE:
For information about changing the default parameters and audio
levels, refer to
DEFINITY Application Notes
available through the
ITAC (International Technical Assistance Center).
3. Administer other forms listed under “Attendant Console” in
DEFINITY
Enterprise Communications Server Release 6 Administration and Feature
Description
.
Save Translations
1. Enter save translation and press Enter. This copies the current system
translations onto the translation card and takes about 10 minutes.
2. Remove the original translation card and replace with the backup card.
3. Repeat Step 1 for the backup translation card.
4. Remove the backup card and replace with the original translation card.
5. Label the backup card with the date and time of the backup and store in a
secure place.
Add Translations
1. Refer to
DEFINITY Enterprise Communications Server Release 6
Administration and Feature Description,
to add new terminals.