A SERVICE OF

logo

Open as PDF
next previous
No. 99MBC034B
2
SETUP
This chapter describes the method used to in-
stall and connect the EV Counter and make its
initial conditions.
2 - 1
2.1 Installing the EV Counter
Both the front and rear panels of the EV Counter have four
mounting holes. Use the fixing legs and junction brackets which
come as the standard accessories to install the EV Counter.
a) The fixing legs
(1) Attach the fixing legs (4 places) on
the counter main unit using the
supplied screws.
(2) Use the oval hole provided on each
fixing leg to secure the counter to
an appropriate surface.
b) The junction brackets
Use the junction brackets and sup-
plied screws to join the two panels
along the vertical.
SETUP
This chapter describes the method used to in-
stall and connect the EV Counter and make its
initial conditions.