4 - 4
No. 99MBC034B
4.3 Switching the Peak Mode (with D-EV)
The internal counters, CEL1 - CEL6, will hold (lock) the peak
values (Max., Min., and TIR) of the count values. Therefore, by
switching the peak mode with the MODE key, it is possible to
switch the value to be displayed (on the D-EV) or output.
(1) Press the DISP key to select a CEL number. The count
value of the selected CEL will be displayed (on the D-EV)
or output.
(2) Press the MODE key to switch the peak mode.
The on/off pattern of the LEDs (on the D-EV) shows the
selected peak mode.
MAX MIN
TIR
Current value: Current stylus position
MAX MIN
TIR
Max.: Maximum value since the peak value
was last cleared.
MAX MIN
TIR
Min.: Minimum value since the peak value
was last cleared.
MAX MIN
TIR
TIR: Max. - Min.
NOTE • Peak values are retained in memory even when the
power is off.
• The peak mode can be switched by RS-232C commu-
nication.
