A SERVICE OF

logo

Open as PDF
next previous
7 - 6
No. 99MBC034B
7.4.4 Segment output
1) Function
Outputs the CEL data specified by the output CEL designa-
tion as segment data.
The segment output function is used to evenly divide the
measurement range previously set into 21 segments, so that
the 21 tolerance judgment stages of the measured value can
be output.
21 pins numbered from -L10 to +L10 are used for this seg-
ment output.
2) Parameter setups
I/O function selection parameter:Set to NORMAL.
I/O-type selection parameter: Set to segment output
3) Pin assignment
1
19
18
36
No. Name I/O
Functional description
1 COM Common terminal of I/O circuit
2 COM (connected to internal GND).
3 -OV OUT To be output if the measured value
exceeds the measurement range.
4 -L10 OUT Segment output data.
5 -L9 OUT
6 -L8 OUT
7 -L7 OUT
8 -L6 OUT
9 -L5 OUT
10 -L4 OUT
11 -L3 OUT
12 -L2 OUT
13 -L1 OUT
14 L0 OUT
15 +L1 OUT
16 +L2 OUT
17 +L3 OUT
18 +L4 OUT
19 +L5 OUT
20 +L6 OUT
21 +L7 OUT
22 +L8 OUT
23 +L9 OUT
24 +L10 OUT