4 - 6
No. 99MBC034B
4.5
Input of Preset Value/Tolerance Value (with D-EV)
With the D-EV it is possible to input a setting value consisting
of a maximum of six digits.
(1) Press the DISP key to select a CEL number. The count
value of the selected CEL will be displayed (on the D-EV)
or output.
(2) Press the Fn key to select the type of setting value (preset
value, lower limit, and upper limit). The on pattern of the
GAGE No. LED, indicating the selected CEL number, will
flash in a different color according to the type of setting
value selected, and the current setting value will be dis-
played on the D-EV.
Preset value
GAGE
green
Lower tolerance limit
GAGE
amber
Upper tolerance limit
GAGE
red
[Display on the D-EV (current value display)]
UNIT
+NG
GO
-NG
NOTE The D-EV Counter uses a 6-digit display, however a
value consisting of a maximum of eight digits can be
set using the RS-232C communication function. If a
number consisting of more than seven digits has al-
ready been set, the most significant one or two digits
will be represented by an "F", as in F34.567, on the
display.
(3) Enter the setting value.
MODE key: Shifts the digit place (flash) for input.
P.SET key: Inputs the setting value (places a digit).
Fn key: Aborts the input operation (modification of
the setting value is canceled).
[Display on the D-EV]
UNIT
+NG
GO
-NG
UNIT
Either ± sign must be set with the most signifi-
cant digit. The displayed number will change in
the following order: 0, 1, ...9, -0, -1, ...-9, 0.
