iii
PRECAUTIONS
To obtain the optimum performance from it, obey the
following precautions
• Neither remove the cover nor disassemble
this counter.
Doing so may expose personnel to electric
shock or result in damage or fire to this
counter due to a short circuit caused by metal
chippings or dust.
• Note the warning labels on the top surface of
this counter.
• This counter is a precision instrument. Do not
bump or apply excessive force to any part of
this counter when setting it up or operating it.
• Use this counter in an environment where the
temperature is between 0°C and 40°C. The
temperature variation should be minimized so
there is no condensation.
• Avoid operating this counter in the following
places:
where it will be exposed to cutting chips and
oil, dirt, dust, or significant vibrations,
where it will be exposed to direct sunlight, or
near high-voltage/large current power
equipment.
CONFORMANCE TO EC DIRECTIVES
This counter conforms to the following EC Directives:
• Low Voltage Directive (73/23/EEC)
EN61010-1: 1993, Demand of safety
• EMC Directive (89/336/EEC)
EN61326-1:1997 + A1:1998
Immunity test requirement: Annex A
Emission limit: Class B
WARNING
