Filter
Top Products
4 GPSMAP
®
6000/7000 Series Owner’s Manual
Getting Started
Inserting and Removing Data and Memory Cards
Your chartplotter supports SD cards. Insert optional BlueChart
®
g2 Vision
®
data cards to view
high-resolution satellite imagery and aerial reference photos of ports, harbors, marinas, and other
points of interest. Insert blank memory cards to transfer data such as waypoints, routes, and tracks to
another compatible Garmin chartplotter or a computer (page 69). The SD card slot is located on the
front of the chartplotter.
Open the access door, insert the data card or the memory card into the slot, and press the card
until it clicks.
Press the data card or the memory card into the slot again and release it to eject the card.
Card label
Vertical SD Card Slot
Horizontal SD Card Slot
Card label
Viewing System Information
You can view the software version, the basemap version, any supplemental map information (if
applicable), and the unit ID number. You may need this information to update the system software or
to purchase additional map data information.
From the Home screen, select Congure > System > System Information.
•
•