Filter
Top Products
GPSMAP
®
6000/7000 Series Owner’s Manual 79
Radar
Stop Radar Targeting
1. From the Home screen, select Radar.
2. Select
Cruising, Harbor, or Offshore.
3. Complete an action:
For the GPSMAP 6000 series, use the Rocker to select a targeted object.
For the GPSMAP 7000 series, touch a targeted object.
4. Select
Stop Pointing.
Setting the Safe-zone Collision Alarm
See “Setting the Safe-zone Collision Alarm (page 18).
Viewing a List of AIS and MARPA Threats
From any radar view or the Radar Overlay, you can view and customize the appearance of a list of
AIS and MARPA threats.
1. From the Home screen, select
Radar.
2. Select
Cruising, Harbor, Offshore, Dual Range, Sentry, or Radar Overlay.
3. Complete an action:
Select Menu > Other Vessels > List > Show to open the list in Cruising, Harbor, Offshore,
Dual Range, or Sentry mode, or in the Radar Overlay.
Open the list in Dual Range mode. Select > Menu > Other Vessels > List > Show for
the GPSMAP 6000 series. Select Left > Other Vessels > List > Show for the GPSMAP 7000
series.
4. Select the type of threats to include in the list (All Threats
, MARPA threats only, or AIS threats
only).
Showing AIS Vessels on the Radar Screen
AIS requires the use of an external AIS device and active transponder signals from other vessels.
You can congure how other vessels appear on the Radar screen. The display range setting
congured for one radar mode is applied in every other radar mode, but it is not applied to the Radar
Overlay. The details and projected heading settings congured for one radar mode are applied to
every other radar mode and to the Radar Overlay.
1. From the Home screen, select
Radar.
2. Select
Cruising, Harbor, Offshore, or Sentry.
3. Select
Menu > Other Vessels > Display Setup.
4. Complete an action:
Select Display Range to indicate the distance from your location in which AIS vessels appear.
Select a distance.
Select Details > Show to show details about AIS-activated and MARPA-tagged vessels.
Select Proj. Heading to set the projected heading time for AIS-activated and MARPA-tagged
vessels. For the GPSMAP 6000 series, use the Rocker or the Numeric Keypad to enter the
time. For the GPSMAP 7000 series, use the on-screen keyboard. Select Done.
•
•
•
•
•
•
•