Filter
Top Products
GPSMAP
®
6000/7000 Series Owner’s Manual 25
Charts and 3D Chart Views
Fishing Chart Navigation Chart
The Fishing chart uses detailed bathymetric data on a preprogrammed BlueChart g2 Vision data
card, and is best for offshore deep-sea shing.
Fishing Chart Appearance
Using Waypoints
See “Waypoints” (page 34).
Using Tracks
See “Tracks” (page 39).
Showing Other Vessels
See “Conguring the Appearance of Other Vessels” (page 66).
Showing Navaids
From the Home screen, select Charts > Fishing Chart > Menu > Navaids > On.
Showing Data Bars
See “Data Bars” (page 62).
Showing Satellite Imagery on the Navigation Chart
You can overlay high-resolution satellite images on the land, on the sea, or on both portions of the
Navigation chart when using a preprogrammed BlueChart g2 Vision data card.
NOTE
: When enabled, the high-resolution satellite images are only present at lower zoom levels.
If you cannot see the high-resolution images in your BlueChart g2 Vision region, you can zoom in
further by selecting the Range (+) key (GPSMAP 6000 series) or the button (GPSMAP 7000
series). You also can set the detail level higher by changing the map zoom detail (page 11).
1. From the Home screen, select
Navigation Chart > Menu > Chart Setup > Photos.
2. Complete an action:
Select Land Only to show standard chart information on the water, with photos overlaying
the land.
Select Photo Map to show photos on both the water and the land at a specied opacity. Select
and hold Up or Down to adjust the photo opacity. The higher you set the percentage, the more
the satellite photos cover both land and water.
•
•