Filter
Top Products
80 GPSMAP
®
6000/7000 Series Owner’s Manual
Radar
VRM and EBL
The variable range marker (VRM) and the electronic bearing line (EBL) measure the distance and
bearing from your boat to a target object. On the Radar screen, the VRM appears as a circle that is
centered on the present location of your boat, and the EBL appears as a line that begins at the present
location of your boat and intersects the VRM. The point of intersection is the target of the VRM and
the EBL.
Showing the VRM and the EBL
The VRM and the EBL congured for one mode are applied to all other radar modes.
1. From the Home screen, select
Radar.
2. Select
Cruising, Harbor, Offshore, or Dual Range.
3. Complete an action:
Select Menu > Show VRM/EBL for Cruising, Harbor, or Offshore mode.
Congure the setting for the short-range screen in Dual Range mode. Select > Menu
> Show VRM/EBL for the GPSMAP 6000 series. Select Left > Show VRM/EBL for the
GPSMAP 7000 series.
Congure the setting for the long-range screen in Dual Range mode. Select > Menu
> Show VRM/EBL for the GPSMAP 6000 series. Select Right > Show VRM/EBL for the
GPSMAP 7000 series.
Adjusting the VRM and the EBL
You must show the VRM and the EBL before you can adjust them (page 80).
You can adjust the diameter of the VRM and the angle of the EBL, which moves the intersection
point of the VRM and the EBL. The VRM and the EBL congured for one mode are applied to all
other radar modes.
1. From the Home screen, select
Radar.
2. Select
Cruising, Harbor, Offshore, or Dual Range.
3. Complete an action:
Select Menu > Adjust VRM/EBL > Move VRM/EBL for Cruising, Harbor, or Offshore
Mode.
Congure the setting for the short-range screen in Dual Range mode. Select > Menu >
Adjust VRM/EBL > Move VRM/EBL for the GPSMAP 6000 series. Select Left > Adjust
VRM/EBL > Move VRM/EBL for the GPSMAP 7000 series.
Congure the setting for the long-range screen in Dual Range mode. Select > Menu >
Adjust VRM/EBL > Move VRM/EBL for the GPSMAP 6000 series. Select Right > Adjust
VRM/EBL > Move VRM/EBL for the GPSMAP 7000 series.
4. Select a new location for the intersection point of the VRM and the EBL:
For the GPSMAP 6000 series, use the Rocker to select a new location.
For the GPSMAP 7000 series, touch a new location.
5. Select
Done.
•
•
•
•
•
•
•
•