Filter
Top Products
116 GPSMAP
®
6000/7000 Series Owner’s Manual
Appendix
Viewing the Event Log
The event log shows a list of system events.
From the Home screen, select Congure > System > System Information > Event Log.
Saving System Information to a Memory Card
You can save system information to a memory card as a troubleshooting tool. A Garmin Product
Support representative may ask you to use this information to retrieve data about the marine
network.
1. Insert a memory card into the SD card slot on the chartplotter.
2. Select
Congure > System > System Information > Save to Card.
3. Remove the memory card.
Restoring the Original Chartplotter Factory Settings
NOTE: This procedure deletes all settings information you have entered.
1. From the Home screen, select
Congure > System > System Information > Factory Settings >
Reset.
2. Select
Yes.
Communication with Wireless Devices
Connecting a Wireless Device
You can allow wireless devices, such as a remote control or an optical mouse, to communicate with
the chartplotter.
From the Home screen, select Congure > Communications > Wireless Devices > New
Connections > Yes.
Disconnecting a Wireless Device
1. From the Home screen, select Congure > Communications > Wireless Devices.
2. Select a wireless device.
3. Select
Disconnect.
Garmin Marine Network
The Garmin Marine Network allows you to share data from Garmin peripheral devices with Garmin
chartplotters quickly and easily. You can connect a GPSMAP 6000/7000 series chartplotter to a
Garmin Marine Network to receive data from and share data with other Marine Network-compatible
devices and chartplotters.
Transferring Data over the Garmin Marine Network
See “Chartplotter Data Management” (page 69).
Conguring Networked Devices
See “Networked Device Conguration” (page 71).