Filter
Top Products
GPSMAP
®
6000/7000 Series Owner’s Manual 71
Device Conguration
Backing Up Data to a Computer
1. Insert a memory card into the SD card slot on the chartplotter.
2. From the Home screen, select
Information > User Data > Data Transfer > Card > Save to
Card.
3. Complete one of the following actions to indicate the name of the le to be backed up:
Select a le name from the list.
Select Add New File to create a new le. Enter the le name. Select Done.
4. Select
Save To Card.
The le name is saved with an .ADM extension.
5. Remove the memory card from the chartplotter and insert it into an SD card reader attached to a
computer.
6. From Windows
®
Explorer, open the Garmin\UserData folder on the memory card.
7. Copy the backup le on the card and paste it to any location on the computer.
Restoring Backup Data to a Chartplotter
1. Insert a memory card into an SD card reader that is attached to the computer.
2. Copy a backup le from the computer to the memory card, into a folder named Garmin\UserData.
3. Insert the memory card into the SD card slot on the chartplotter.
4. From the Home screen, select
Information > User Data > Data Transfer > Card > Replace
From Card.
Networked Device Conguration
Viewing Connected Garmin Marine Network Devices
From the Home screen, select Congure > Communications > Marine Network.
Each connected device is listed along the left side of the screen.
Assigning a Name to a Garmin Marine Network Device
1. From the Home screen, select Congure > Communications > Marine Network.
2. Select a device.
3. Select
Review.
4. Enter a name for the device:
For the GPSMAP 6000 series, use the Rocker.
For the GPSMAP 7000 series, use the on-screen keyboard.
5. Select
Done.
•
•
•
•