Filter
Top Products
GPSMAP
®
6000/7000 Series Owner’s Manual 41
Navigation
Clearing the Active Track
From the Home screen, select Information > User Data > Tracks > Clear Active Track.
The track memory is cleared, and the current track continues to be recorded.
Managing the Track Log Memory During Recording
1. From the Home screen, select Information > User Data > Tracks > Active Track Options >
Record Mode.
2. Complete an action:
Select Fill to record a track log until the track memory is full.
Select Wrap to continuously record a track log, replacing the oldest track data with new data.
Conguring the Recording Interval of the Track Log
You can indicate the frequency at which the track plot is recorded. Recording more-frequent plots is
more accurate but lls the track log faster.
1. From the Home screen, select
Information > User Data > Tracks > Active Track Options >
Interval > Interval.
2. Complete an action:
Select Distance to record the track based on a distance between points. Select Change to set
the distance. For the GPSMAP 6000 series, use the Rocker or the Numeric Keypad. For the
GPSMAP 7000 series, use the on-screen keyboard. Select Done.
Select Time to record the track based on a time interval. Select Change to set the time. For
the GPSMAP 6000 series, use the Rocker or the Numeric Keypad. For the GPSMAP 7000
series, use the on-screen keyboard. Select Done.
Select Resolution to record the track plot based on a variance from your course. This setting
is recommended for the most-efcient use of memory. Select Change to enter the maximum
error allowed from the true course before recording a track point. For the GPSMAP 6000
series, use the Rocker or the Numeric Keypad. For the GPSMAP 7000 series, use the on-
screen keyboard. Select Done.
3. Select
Done.
Copying Tracks
See “Chartplotter Data Management” (page 69).
Deleting All Saved Waypoints, Routes, and Tracks
From the Home screen, select Information > User Data > Clear User Data > All.
Navigating with a Garmin Autopilot
When you start any type of navigation (Go To, Route To, Guide To, or Follow Track), if you are
connected to a compatible Garmin autopilot (such as the GHP
™
10), you are prompted to engage the
autopilot.
•
•
•
•
•