Filter
Top Products
56 GPSMAP
®
6000/7000 Series Owner’s Manual
Almanac, Environmental, and On-boat Data
Conguring the VGA Display
Before you can congure the VGA display mode on a GPSMAP 7015 or 7215 chartplotter, you must
set the video Source setting to VGA Input (page 55).
1. From the Home screen, select
Information > Video.
2. Touch anywhere on the screen.
An on-screen display appears.
3. Complete an action:
Touch the brightness arrows to adjust the screen brightness.
Touch the contrast arrows to adjust the screen contrast.
Exiting the VGA Display
1. From the Home screen, select Information > Video.
2. Touch anywhere on the screen.
An on-screen display appears.
3. Touch the display mode icon in the upper-left corner.
The video menu appears.
4. Select
Source.
5. Select a new value for the video Source setting (
page 55).
•
•