Lowrance electronic LMF-200 Marine Instruments User Manual


 
9
NOTE:
If you add an EP-10 Fuel Flow, EP-15 Fluid Level, EP-45 Water
Pressure or EP-50 Storage Device sensor to the network, you must
go through Boat Setup so the engine-tank configuration will be
consistent among the sensors in the LowranceNet. Follow the Boat
Setup procedure in Section 3: Operation.
Additional Network Information
For more detailed information about setting up a NMEA 2000 network,
refer to the "Setup and Installation of NMEA 2000 Networks, General
Information" that came with your unit. If you do not have that
document, it can be downloaded free from the Lowrance web site.