Filter
Top Products
46
If all interfaces configured (Configuration name unavailable):
1. Press
MENU, use the UP and DOWN keys to select SYSTEM SETUP and
press
MENU.
2. Highlight
B. DEVICES and press MENU. The Bus Devices list will appear.
3. Select Port Eng and press
MENU.
4. Highlight
UNSET ENGINE and press MENU. The following message will
appear: Hit Menu to Unset Dev Name.
5
. Press MENU and you will be taken back to the Bus Devices menu,
where engine interface (formerly Port Eng) now will be displayed as
UnCfg Eng. Remember: If the engine interface you just unconfigured is
not shown on the Bus Devices the list, you will have to refresh the list.
Let the Bus Devices list time out then access it again.
6. Highlight
STBD ENG and press MENU. Select CHANGE ENGINE and press
MENU,
which will open the Select Engine menu with up to three options
(Port, Center and Starboard), depending on the engine-tank
configuration you selected.
7. Highlight PORT and press MENU.
8.
You will be taken back to the Bus Devices list, where the engine
interface you selected (formerly Stbd Eng) will now be shown as Port
Eng. If the newly configured interface is not shown, refresh the Bus
Devices list.
9. Now, select UNCFG ENG and press MENU. The following message will
appear:
Hit Menu to Cfg Eng Int. Press MENU.
10. The Suzuki Engine Model menu will appear with the following
options: DF40, DF50, DF60, DF70, DF90/115, DF140, DF150, DF175,
DF200/225, DF250 and DF300. Select your engine from the list and
press
MENU.
11. The Select Engine menu will appear with up to three options: Port,
Center and Starboard. Highlight Starboard and press
MENU. You will
be taken back to the Bus Devices list where the engine interface now
will be displayed as Stbd Eng. If the newly configured interface is not
shown, refresh the Bus Devices list. (If you have a single-engine
configuration, you will not be taken to the Select Engine menu. You
will be returned to the Bus Devices list.)
If desired configuration name available:
1. Press
MENU, use the UP and DOWN keys to select SYSTEM SETUP and
press
MENU.
2. Highlight
B. DEVICES and press MENU. The Bus Devices list will
appear.