Filter
Top Products
17
4. After entering the desired stay time, press
MENU. You will be taken
to the main display.
Pop-up Thresholds
Once you have chosen the pages you want to monitor, you will need to
set a threshold for each page. A pop up will not appear for a page
unless a threshold has been chosen. When a threshold is exceeded, the
pop-up window will appear. If, for example, you set the RPM threshold
to 500 RPM and choose a 10-second Stay on Time, the RPM page will
pop up if there is a change in RPM that exceeds 500 RPM — like
decreasing RPM from 2000 RPM to 1300 RPM. The pop up will expire
10 seconds after the RPM data stops changing. The gauge will revert to
the page it was showing before the threshold was exceeded.
RPM Threshold set up:
Make sure RPM has been selected on the Pop-up Pages menu before
setting a RPM threshold. If it has not been selected on the Pop-up Page
menu, a RPM pop-up will not appear, regardless of the threshold.
1. Press
MENU, use the UP and DOWN keys to select PAGES and press
MENU. Highlight SET POP-UP and press MENU.
2. The Set Pop-up menu will appear with three options: Pages,
Threshold and Stay Time. Select
THRESHOLD and press MENU.
3. To set the threshold for RPM, highlight
RPM and press MENU.
4. Use the
UP and DOWN keys to select a RPM level between 50 and
3000 RPM. Press
MENU and you will be taken back to the main display.
Engine Trim Threshold set up:
Make sure Engine Trim has been selected on the Pop-up Pages menu
before setting an Engine Trim threshold. If it has not been selected on
the Pop-up Page menu, an Engine Trim pop-up will not appear,
regardless of the threshold.
1. Press
MENU, use the UP and DOWN keys to select PAGES and press
MENU. Highlight SET POP-UP and press MENU.
2. The Set Pop-up menu will appear with three options: Pages,
Threshold and Stay Time. Select
THRESHOLD and press MENU.
3. Select
ENGINE TRIM from the Threshold menu and press MENU.
4. Use the
UP and DOWN keys to choose a threshold between 3 and 50
percent. Press
MENU and you will be taken back to the main display.
Trim Tabs Threshold set up:
Make sure Trim Tabs have been selected on the Pop-up Pages menu
before setting a threshold. If Trim Tabs are not selected on the Pop-up
Page menu, a Trim Tab pop-up will not appear, regardless of the
threshold.