Filter
Top Products
40
To configure EP-15 Fluid Level for Fuel:
1. Make sure the Fuel Remaining Source has been set to Fluid Level.
Press
MENU, select SYSTEM SETUP and press MENU.
2. Highlight
FUEL MNGR (Fuel Manager) and press MENU. Select FREM SRC
(Fuel Remaining Source) and press
MENU. Highlight FLUID LEVEL and
press
MENU. You will be taken back to the main display. Now we are
ready to configure the sensor.
3. Press
MENU, select SYSTEM SETUP and press MENU. Highlight B. DEVICES
and press MENU.
4. Select an unconfigured fluid level from the bus devices list and press
MENU. The fluid level menu will appear.
5. Highlight
FUEL from the list of fluid types and press MENU. If your
engine-tank configuration is set for multiple tanks, a menu will appear
with up to three options: Port Tank, Cen (Center) Tank and
Stbd
(Starboard) Tank.
6. Highlight one of the three tank options and press
MENU. You will be
taken back to the Bus Devices list, where your newly configured Fluid
Level will be listed as: F. Tnk (P), F. Tnk (C) or F. Tnk (S), depending
on the tank location you chose. If you have one tank, it will be shown as
F. Tnk.
To configure EP-15 Fluid Level for Fresh Water:
1. Press
MENU, select SYSTEM SETUP and press MENU. Highlight B. DEVICES
and press
MENU.
2. Select the desired unconfigured fluid level (Unfcg FL
) from the Bus
Devices list and press
MENU, which will launch the following message:
Hit Menu to Cfg FLev Sns.
3. Press
MENU, select FRESH W from the list of fluid types and press
MENU. The Tank Number window will appear.
4. Assign a tank number (1, 2 or 3) to the tank using the fluid level you
are configuring and press
MENU. That will launch the Tank Size
window.
5. Input the capacity of the tank (gallons) and press
MENU. You will be
directed to the Bus Devices list, where the fluid level you configured
will be displayed as FrW Tnk1, FrW Tnk2 or FrW Tnk3, depending on
the tank number you assigned it.
To configure EP-15 Fluid Level for Waste Water (Gray Water):
1. Press MENU, select SYSTEM SETUP and press MENU. Highlight B. DEVICES
and press
MENU.